IMPORTANT!! Don't upload QSOs to eQSL! - Printable Version +- Swisslog's Forum (https://www.swisslogforwindows.com/forum) +-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3) +--- Forum: Error reports (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=6) +--- Thread: IMPORTANT!! Don't upload QSOs to eQSL! (/showthread.php?tid=364) |
IMPORTANT!! Don't upload QSOs to eQSL! - EA3GCV - 08-12-2017 Hello all, Swisslog 5.97 uploads QSO to eQSL using the old eQSL method, that is, performing some mode conversions to modes recognised by eQSL. This way Swisslog uploaded QSO in all MFSK submodes (MFSK4, MFSK8, etc) setting MFSK mode. All HELL submodes (FMHELL,HELL80, etc) were uploaded as HELL. All PSK31,63,125 etc modes were uploaded as PSK. Now eQSL recognises correctly all submodes if uploaded in the mode field and converted it automatically to mode-submode combination. This has required a change in the source code of Swisslog to adapt to this new scenario. All users who have uploaded QSOs in realtime or uploading his logbook in any PSK, MFSK or HELL submode (PSK31, PSK63, PSK125, FMHELL, MFSK8, etc) with version 5.97, will have to review these QSO in your eQSL account. You can either:
NOW wait until 5.97a is released shortly! SORRY for the inconveniences!! |