(12-09-2020, 04:35 PM)EA3GCV Wrote: Hello Erik,
Glad that I finally solved this!
The "Set mode from QRG" should turn unchecked after linking to JTDX as well as "Do not set mode from TX" must be checked. But when JTDX closes or user press the UDP button to disable the link, both settings will be restored to the user initial settings (remember, the settings when the QSO Entry window shows up!). I have tested dozens of times here and works perfectly. Also tested in other users. But it's very important to know that in order Swisslog reads properly the "user settings", you have to set these settings as your preference then close and open the QSO Entry window. This way Swisslog will read the right settings before the UDP link becomes on automatically. Once you know how this works, it should work for you as well. But it's very important to close and open the QSO Entry once you want to keep your personal settings.
Best 73
This is a vital piece of information that I have not seen prior to your statement. Ok, so it is working as described. But these settings are inconsistent with other check boxes in the Options window. For example, changing real-time entry from on to off does make that change immediately without the need to close and open the QSO Entry window. Therefore there must be a mechanism incorporated in the programming to take a setting change and apply it without further user intervention. That mechanism ought to work for all settings and not omit those that are essential to specific aspects of Swisslog functions. I daresay this is a legacy of ancient Walter programming but should be addressed in the future to help users with configuring their choices.
