(12-09-2020, 02:09 PM)EA3GCV Wrote: Hello Erik,
I have found out the reason of the mode change! I have uploaded a new Beta. It has been tested also by another beta tester (Senio, EA1AHY) who also had the same mode change issue before this beta and now works ok for him. This is what should happen on this beta:
- When the QSO Entry window shows up, the "Do not set mode from transceiver" and "Set Mode from QRG" settings are saved in a variable to know the "initial user settings"
- When Swisslog receives any data from WSJT-X (or JTDX it works exactly the same way) the UDP link button is set Green and the "Do not set mode from transceiver" is automatically checked and the "Set Mode from QRG" is automatically unchecked. Previous to this beta I did this only when Swisslog received a status change and I reverted to user settings every time a QSO was saved or the Clear button was pressed from JTDX. Now these settings won't be reverted to user's settings until the UDP link is disconnected or JTDX is closed. This way I ensure there are not many setting changes during the link, improving performance.
Please test and let me know but now should work well.
Best 73
Hello Jordi
1. The two settings are not behaving as you describe. Starting with both set to on (checked), when JTDX launches the setting "Set Mode from QRG" becomes unchecked. The other one remains checked. When JTDX is closed, both settings are unchecked. So I am back to setting them back on manually after every JTDX session.
2. The main problem of switching mode is solved now, you will be pleased to hear. Launch JTDX and the mode goes to FT8 (or FT4 or whatever) and there is no sign of RTTY. The QSO to Add QSOs box and the subsequent saving is now smooth and faster as well.
I doubt the efficacy of the two settings even when they are set to my choice of both being on. That they are both off after JTDX closes actually doesn't really affect anything. Even with both unchecked, Swisslog still follows the mode of the transceiver. So quite honestly, even if the issue of the settings not reverting to my choice is never fixed, it will not matter. The main thing is that the whole process of saving QSOs from JTDX is now appears to be perfect.
