(08-09-2020, 08:20 PM)dk4rh Wrote: Hi Jordi,
sorry - also with the new version issue was two times.
Have ordered a hamcall subscribtion and changed to those. Will see, if it is running in those way.
Is e quite nice feature to load the detail data of the user...
In my case, the beta does improve things but not solve them and eventually I get the same failure. One thing I have found: if I set in Options 'Do Not set Mode From TX' and 'Set Mode from QRG' then everything is perfect on SSB and CW. When I change to DIG mode on a FT8 frequency, Swisslog shows FT8 in the mode box. But when I launch JTDX, it forces both those settings unchecked and the mode box then incorrectly shows RTTY. Then the lottery starts: mode has to change from RTTY to FT8 (and occasionally it does this multiple times) and whilst usually Swisslog survives the stopping of all other functions during this, somethimes it loses sync and that is the end. The beta has reduced the number of instances of this but it happens still. After closing JTDX, those two settings do not revert to my choice and so affect future operation of Swisslog even on other modes.
