Posts: 48
Threads: 8
Joined: May 2020
Reputation:
0
RE: connection to jAlert lost
I have activated wireshark in parallel. Whit this trace it is clear, that only one application is sending on port 2334.
What I can also see there, if an application (SwissLog) is open and is receiving this information.
Just before the hanging situation was happened again. With the wireshark trace I could see, that udp-2334 data still transfered to Swisslog. But there was no reaction. Only after stopping and starting Swisslog again it was running.
Sorry, seems there is an issue in Swisslog.
Maybe the details are helpful. Hope I can attach the files to this statement...
In Word-Document what can be seen in Swisslog, what was happened in WSJT-X and the wireshark trace.
Problem is, that the QSO(s) are not logged and it is a little bit hard to do those afterwards. Currently I am checking the reaction of SwissLog for each QSO which should be logged - So I have only to enter those one.
Hope those all is helpful to find the issue
73 Roland, DK4RH
Additional info. After recap of missing QSOs I found out, that 3 are missed. So it must be happened a little bit before.
Just jet (UTC 18:44) same issue came up. See 200830b-SwissLogHangig.JPG
Here I changed to try answer a call (to CP9JPG) to another(EA2DXY), than SP9JP begun to answer. Later on I changed my answer to SP9JP.
Seems also in the first hanging it was an equal situation.
