24-09-2018, 06:56 PM,
|
|
py1fr
Junior Member
|
Posts: 36
Threads: 12
Joined: Sep 2018
Reputation:
0
|
|
WSJT-X UDP Settings Ok, but no RST reports
Dear friends,
Although I have made the settings for UDP Server in the WSJT-X software according to the Swisslog Help, after clicking the LOG QSO button, the QSO information is sent to the Log in Swisslog, minus the RST's sent and received.
I tested with JTDX using the settings for TCP Server and it worked perfectly ..
Did someone have the same problem?
PY1FR,
Fernando Rodrigues
Niterói - Rio de Janeiro
Brazil
|
|
24-09-2018, 08:41 PM,
|
|
py1fr
Junior Member
|
Posts: 36
Threads: 12
Joined: Sep 2018
Reputation:
0
|
|
RE: WSJT-X UDP Settings Ok, but no RST reports
(24-09-2018, 08:24 PM)EA3GCV Wrote: Hello Fernando,
Are you using the latest version of JTDX 18.1.92? I use JTDX daily and I have never had any problem. Full QSO data stream is sent to Swisslog after clicking the Log QSO button (or if you have enabled automatic logging, just after JTDX receives the RR73 or RRR). Make sure you add an exception to Swisslog and JTDX in your antivirus and firewall to ensure it's not blocking the UDP communication. Use also latest Swisslov version 5.98b. There have been changes in the data stream sent by WSJT-X /JTDX. If you use old versions of these programs this could be the reason.
Best 73
Hello Jordi.
Many thanks for your help.
I will install the latest version of WSJT-X and JTDX, and inform you the results.
73!
PY1FR,
Fernando Rodrigues
Niterói - Rio de Janeiro
Brazil
|
|
25-09-2018, 01:44 PM,
|
|
py1fr
Junior Member
|
Posts: 36
Threads: 12
Joined: Sep 2018
Reputation:
0
|
|
RE: WSJT-X UDP Settings Ok, but no RST reports
(24-09-2018, 08:41 PM)py1fr Wrote: (24-09-2018, 08:24 PM)EA3GCV Wrote: Hello Fernando,
Are you using the latest version of JTDX 18.1.92? I use JTDX daily and I have never had any problem. Full QSO data stream is sent to Swisslog after clicking the Log QSO button (or if you have enabled automatic logging, just after JTDX receives the RR73 or RRR). Make sure you add an exception to Swisslog and JTDX in your antivirus and firewall to ensure it's not blocking the UDP communication. Use also latest Swisslov version 5.98b. There have been changes in the data stream sent by WSJT-X /JTDX. If you use old versions of these programs this could be the reason.
Best 73
Hello Jordi.
Many thanks for your help.
I will install the latest version of WSJT-X and JTDX, and inform you the results.
73!
Hello Jordi,
I upgraded the JTDX software and it only works well using TCP mode.
In UDP mode at the end of the QSO an error message appears.
I'm using TCP mode then, and everything is ok.
In WSJT-X at the end of the QSO, the RST send and receive are not transferred to the swisslog.
73!
PY1FR,
Fernando Rodrigues
Niterói - Rio de Janeiro
Brazil
|
|
23-02-2019, 10:04 PM,
|
|
OK1VP
Junior Member
|
Posts: 4
Threads: 0
Joined: Jan 2019
Reputation:
0
|
|
RE: WSJT-X UDP Settings Ok, but no RST reports
Hi Jordi
I have silimilar problem wit communication. I use WSJT X but there is not possible to send RST from WSJT X. Callsign is send standard way but RST + QRG not. If I fill it and save it manually then is not possible to send nothing -I have to close window "Entry of QSOs" and open agin then work.
1. Using W8.1 - both programs run as administrator
2. stopped firewall and antivirus
3. uninstalled a new installed both programs Swisslog v 5.99 and 5.99a tested
I tested also running SW in compatible mode WINDOWS XP-SP3
4. checked UDP comunication and changed number of UDP Port
Does not help. I did a long investigation but now any idea.Could you plese suppose any solution?
BR
73! Vilem , OK1VP
|
|
26-02-2019, 01:49 PM,
|
|
DF1JC
Member
|
Posts: 50
Threads: 13
Joined: Mar 2015
Reputation:
0
|
|
RE: WSJT-X UDP Settings Ok, but no RST reports
Hi Gents,
the same Problem was here with sending report. RX Report was in Log TX report not. And i have hat also any other small problems with Swisslog after many years of update the SwissLog.
Now i have don a complete new install with the recent Version and:
All worked perfectetely
Maybe a way to heaven
|
|
27-02-2019, 08:23 PM,
(This post was last modified: 27-02-2019, 08:24 PM by OK1VP.)
|
|
OK1VP
Junior Member
|
Posts: 4
Threads: 0
Joined: Jan 2019
Reputation:
0
|
|
RE: WSJT-X UDP Settings Ok, but no RST reports
(25-02-2019, 04:44 PM)EA3GCV Wrote: Hello Vilem,
PLEASE don't run Swisslog in compatibility mode with Windows XP or any other compatibility method. The RST and frequency are sent AFTER the QSO is logged in WSJT-X (after pressing the Log QSO button). During the UDP link, only Callsign, mode and QTH locator are sent from WSJT-X. WSJT-X sends all other fields to external programs, just after pressing the LOG QSO button.
Best 73
Hi Jordi,
I did it as first- not help, install new installation and set admin right and stop blocking port plus program in the firewall. No help.
BR
Vilem
|
|
|