THANKS very much Jordi
now I have it working. So now with an antenna at home will try to fill any band slot for DXCC :-)
73,
Jorge
CX6VM/CW5W
(05-05-2014, 01:41 PM)ea3gcv Wrote: Hi all,
You have created a Report instead of a new statistic. In order to make things easy I have made all the work for all of you...
Follow these steps:
1. Download the new statistic file: http://www.spanish.icap.ch/SWLSTAT.MDB
2. Copy this file in the Swisslog folder (overwriting the existing one).
3. You will now have 3 new standard statistics: DXCC-SSB, DXCC-CW and DXCC-RTTY
4. You have to open 3 different DX Cluster windows, one for each mode: In the first one you have to only select the statistic DXCC-SSB and select the bands you want but ONLY check the SSB mode. Apply a Title Height of 75 otehrwise you will only see DXCC as title instead of DXCC-SSB.
5. Open a second DX Cluster window, select only the DXCC-CW statistic, the bands you want and ONLY check the CW mode. Apply a Title Height of 75 otherwise you will only see DXCC as title instead of DXCC-CW.
6. Open a third DX Cluster window, select only the DXCC-RTTY statistic, the bands you want and ONLY check the RTTY mode. Apply a Title Height of 75 otherwise you will only see DXCC as title instead of DXCC-RTTY.
7. It's important that you have a well defined band plan in Edit | Edit band plan so that Swisslog can filter by frequency when a DX spot is received to know the right mode based on the frequency. This is also useful for rig control. So you have to define all frequency ranges for each mode in each band. By default the clean database included in the installer has a well defined band plan for the IARU Region 1 (Europe, Africa, Middle East and Northern Asia based in SSB, CW and RTTY modes.
You will have to check the different DX Cluster windows depending the mode you want to check the statistic status for each band.
I hope I have explained all this clear enough. If you have any doubt don't hesitate to contact me.
Best 73
Jordi
what seems is not working well is WAS statistic, because in DX Message windows, appears ans needed all spots, also the spots for non USA callsigns, and the sound alert activate with any spot, really a mess of audio alerts :-)
73,
JOrge
CX6VM/CW5W
(30-04-2014, 09:15 AM)ea3gcv Wrote: Hello,
In the DX Cluster Window you can set a band/mode filter. You can create as many DX Cluster windows as different band/mode selection you need.
The problem is that the DXCC statistic counts all modes together. Example: if you have confirmed EA on SSB in 15m and you need it on CW in the same band, when a spot for a EA station in CW will give "C" as result (even if you have set the filter in the Dx Cluster window).
The best way to solve this is to create a separated DXCC statistic which only counts the mode you want, just to be used in the Dx Cluster window. You should create as many DXCC statistics as different modes you want to filter in the Dx Cluster window.
Regarding the CX6VM question, if you want to know if a certain spot is needed only for the LotW, you should add the DXCC LOTW statistic in the
DX Cluster window.
If you don't know how to create an specific DXCC for each mode please let me know and I will try to create it for you.
Maybe it would be a good idea to create a couple of new statistics (DXCC CW and DXCC RTTY) and made them available in the next updater for all Swisslog users...
Best 73
