+- Swisslog's Forum (https://www.swisslogforwindows.com/forum)
+-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3)
+--- Forum: Error reports (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=6)
+--- Thread: LOTW +SWL new instal doesn't work (/showthread.php?tid=98)
LOTW +SWL new instal doesn't work - on4bam - 11-09-2013
Now that I have more time on my hands I finally wanted to fix the problem I had with SWL on my Win7 laptop.
LOTW software + certificates are working OK (1.14.3)
Swisslog (5.8) was installed and runs "as admin" and seems to work OK. After installing 1 QTH was created and for test purposes 1 QSO was entered. After closing down SWL, rebooting and starting SWL again all seems OK (my initial problem on the laptop was that QSO's were not saved).
In the MyQTH tab (Details/New) I'm not able to enter a LOTW station.
In TOOLS >> LOTW sync >> configuration >> passwords I can see 1 Certificate Callsign (OO4BAM) and I can enter the password and also the LOTW web user and LOTW web password.
In "Station/QTH" I see the MyQTH info but I can't choose a LOTW station (only NONE is available).
I have tqsllib.dll and tqsllib2.dll in the SWL directory as well as in the TrustedQSL directory
Any ideas?
EDIT: It seems that this would do the trick:
Quote:"Start the TQSL program and select Station ¦ Add Locations."
I missed that while looking for a solution...
This is going to take a while in order to get my 27 certificates recognized in SWL and than import/exporting the QSO's from my main PC to the laptop.
Thanks in advance.
RE: LOTW +SWL new instal doesn't work - EA3GCV - 12-09-2013
Hello Maurice:
As you have find out you have to add a new station in TQSL for each certificate in order to match Swisslog QTH's with TQSL Stations.
Trusted QSL 1.14.3 seems to run well. However after syncronising you have to assign the new LOTW field "APP_LOTW_MODEGROUP" with the C_NOTE or L_NOTE field in Swisslog. Otherwise you can miss some QSO during the syncronisation process.
Best 73
RE: LOTW +SWL new instal doesn't work - dl6sak - 12-02-2014
(12-09-2013, 01:42 AM)ea3gcv Wrote: Hello Maurice:
As you have find out you have to add a new station in TQSL for each certificate in order to match Swisslog QTH's with TQSL Stations.
Trusted QSL 1.14.3 seems to run well. However after syncronising you have to assign the new LOTW field "APP_LOTW_MODEGROUP" with the C_NOTE or L_NOTE field in Swisslog. Otherwise you can miss some QSO during the syncronisation process.
Best 73
Win8, SWL and TQSL2.0:
Import of LOTW QSOs is ok, but export doens´t work.
In TQSL I created station locations which show up in QSOs export as LOTW Stations.
But in MyQTH still in field LOTW station there is NONE.
Is there anything I missed?
73 de Annette, DL6SAK
RE: LOTW +SWL new instal doesn't work - EA3GCV - 16-02-2014
Hi Annette,
You have to match your Lotw stations with the Swisslog QTH's in Tools | LOTW Syncronisation | Configuration | Station / QTH.
Best 73
RE: LOTW +SWL new instal doesn't work - dl6sak - 16-02-2014
(16-02-2014, 04:42 PM)ea3gcv Wrote: Hi Annette,
You have to match your Lotw stations with the Swisslog QTH's in Tools | LOTW Syncronisation | Configuration | Station / QTH.
Best 73
Hi Jordi,
thank you - it worked fine!
We see us on HAM RADIO?
Best 73, Annette, DL6SAK
RE: LOTW +SWL new instal doesn't work - EA3GCV - 18-02-2014
Hi Annette,
I would like to go but I don't know if this would be possible. If so I will let you know!
Best 73