Get LOTW QSOs: 0 QSOs downloaded - Printable Version +- Swisslog's Forum (https://www.swisslogforwindows.com/forum) +-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3) +--- Forum: Error reports (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=6) +--- Thread: Get LOTW QSOs: 0 QSOs downloaded (/showthread.php?tid=818) |
Get LOTW QSOs: 0 QSOs downloaded - HB9ODP - 11-11-2020 Hi I'm on a new PC, just copied as always the folder swisslog in C:\Program Files (x86) then installed the last vs 5.100e, then trustQSL 2.5.5 activated with a valid certificate. This time something it's going wrong. Now I'm trying to Synchronize Lotw but i Get always: Downloading QSOs from LOTW 0 QSOs downloaded from LOTW Downloading QSLs fron LOTW 0 QSLs downloaded from LOTW Sometime in 1 seconds and sometime it' doesn't work and I have to stop this step / procedure and I see a red message: Internet busy try later Tryied also to execute only the first step 'Get LOTW QSOs' and going back to 2019 or 2018, always 0 download Export, sign and upload seem to be working; all today QSOs are on LOTW web page. I don't see any error List / Messages In the folder C:\Program Files (x86)\Swisslog\LOTW there is only SWL-LOTW.ini file Reinstalled, rebooted, removed e reinstalled Lotw location / certificate etc, nothing... Tnx for any help ;-) HB9ODP Mattia RE: Get LOTW QSOs: 0 QSOs downloaded - EA3GCV - 11-11-2020 Hello Mattia, According to your explanation I guess you are migrating from an old PC to a new PC. Firstly: Which folder was Swisslog installed in your old PC? Secondly: which folder have you installed the new version? Years ago the installer installed Swisslog in the Program Files folder, but it was changed later to C:\Swisslog to avoid system protection issues. If you had Swisslog installed in your old PC in the Program Files folder and you have installed the new version in C:\Swisslog, then your old files are not used at all. The solution to this bundle is the following: - Copy your Swisslog folder from your old PC in C: instead of Program Files(x86). That is C:\Swisslog. - Edit the SwisslV5.ini located in the Swisslog folder then replace all C:\Program Files(x86)\Swisslog string by C:\Swisslog. Mouse right click on this file, select Edit then use the Replace function of Notepad to replace all coincidences. - Apply the same in the SWL_LOTW.ini located in the LoTW folder - Once you have done this, install new version in the default folder C:\Swisslog. It will upgrade all your existing files. You should have everything working again. If you still have problems, I would need to check remotely via Teamviewer. Contact me via whatsapp to +34 656409020. 73 RE: Get LOTW QSOs: 0 QSOs downloaded - HB9ODP - 12-11-2020 Hello Jordi, thanks for all infos, yes, my MS Windows 7 PC is died so moved to MS Windows 10; removed swisslog, copied my backup to c:\swisslog, changed all paths in SwisslV5.ini (yes before was in c:\program files ...), in SWL_LOTW.ini there are any path and then installed the new 5.100e vs on c:\swisslog. Also changed the rights for the folder c:\swisslog, disabled antivirus. Same, only in the first step on getting qso / qsl, then export sign etc still working. Tomorrow I try again another time, maybe before I try with the old version. Then we can arrange a Teamviwer session. Thanks Mattia RE: Get LOTW QSOs: 0 QSOs downloaded - HB9ODP - 16-11-2020 I tried again in a new path, a network share in my NAS (mapped as S:\) and now it works correctly. ;-) Thanks for help Jordi, 73 |