UTC Time / Windows Time : it is the same ? - Printable Version +- Swisslog's Forum (https://www.swisslogforwindows.com/forum) +-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3) +--- Forum: Error reports (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=6) +--- Thread: UTC Time / Windows Time : it is the same ? (/showthread.php?tid=813) |
UTC Time / Windows Time : it is the same ? - f4hzs - 30-10-2020 Hello, Sorry for my bad english. The time in the + QSO windows is always the same of the time of Windows. If i choose CTRL+O Save UTC Time in log or not choose Save UTC Time in log .... no change, it is the same. Bonjour, Je mets le message en français, car mon anglais est mauvais. L'heure UTC n'est plus enregistrée dans la fenêtre d'ajout de QSO. C'est toujours l'heure windows. Quand je fait CTRL+O et que je coche ou décoche Enregistre l'heure UTC dans le carnet de traffic, ça ne change rien. Une idée ? 73 ! Et merci pour cet excellent logiciel ! RE: UTC Time / Windows Time : it is the same ? - EA3GCV - 30-10-2020 Hello, Swisslog reads the UTC defined accordimg your time zone defined in Windows. Review your time settings in Windows cloxk then select the local time as the windows time and make sure the time zone is correct according France (it will be Paris now - 1). In Swisslog check always Save UTC in log. Best 73 RE: UTC Time / Windows Time : it is the same ? - f4hzs - 31-10-2020 Bonjour Jordi, Thks for your answer. I verified, windows clock is Paris (UTC+1) synchronised time.windows.com 73 Nicolas RE: UTC Time / Windows Time : it is the same ? - EA3GCV - 31-10-2020 Hello Nicolas, You have to enter a callsign for clock to start counting. But is it working well now? 73 RE: UTC Time / Windows Time : it is the same ? - f4hzs - 03-11-2020 Bonsoir, Good evening, No, it's the same local hour. 73s Nicolas, F4HZS RE: UTC Time / Windows Time : it is the same ? - EA3GCV - 04-11-2020 Hello Nicolas, I guess you have replied NO when Swisslog prompted this: Time difference to UTC for the current QTH does not match the settings in Windows! Windows = 1.00 current QTH = 2.00 Press YES if you want to use the time difference defined in Windows. Replying NO (as you did) Swisslog is calculating the time difference to UTC according the "Time Diff to UTC" setting defined in your My QTH (which now it will be 0, that's why UTC and local time is the same). This will cause to always change manually the time diff to UTC in your MyQTH to match the winter/summer time changes. In order to fix this, do the following steps:
Solved : UTC Time / Windows Time : it is the same ? - f4hzs - 05-11-2020 Good evening Jordi, Thank you very much, is ok now. Un trés grand merci Jordi, cela fonctionne maintenant. Effectivement, le problème venait de là : mon qth, la différence UTC était à 0 ! 73 ! Nicolas |