QRG wrong on IC-7000 - Printable Version +- Swisslog's Forum (https://www.swisslogforwindows.com/forum) +-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3) +--- Forum: Error reports (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=6) +--- Thread: QRG wrong on IC-7000 (/showthread.php?tid=630) |
QRG wrong on IC-7000 - OE1GQA - 17-09-2019 I have installed latest version of SWL ( 5.99d) and I have SWL connected via microHAM Station Master to my IC-700 cat-interface when I manually turn the frequency knob, the QRG is correct in the QSO window, no problem If i go to DX Window and doubleclick a station then the frequency transmitted to the IC-7000 has a decimal problem: so for example it should switch to 14.200.1 but it switches to 1.420.01 ??? or other example: DX station is on 14.266.00 the i doubleclick or click switch trx to the frequency, the IC-7000 switches to 1.426.60 ? what do I do wrong ? 73 de OE1GQA Guenter Vienna RE: QRG wrong on IC-7000 - EA3GCV - 17-09-2019 Hi Guenter, This bug was corrected in 5.99c... I'm using ICOM with no problems at all but now I can't check because I'm in the US until next week. Meantime, use another CAT option in Swisslog with a external program such OmniRig, Dx Lab Commander etc. I will check it again when I get home. Best 73 RE: QRG wrong on IC-7000 - OE1GQA - 18-09-2019 Hi Jordi thank you for quick reply, No problem, in the meantime I will change QRG manually on IC-7000. Just one more info: when I click "set transceiver to qrg" I can see the correct qrg on the display of IC-7000. but few milliseconds later the frequency is shifted to the right with wrong decimal points 73 Guenter RE: QRG wrong on IC-7000 - EA3GCV - 26-09-2019 Hi Guenter, I have checked with my IC-756 Pro3 and all is working well here. I have also asked other user who detected this issue in previous versions and now is working ok. I guess you are not using latest version 5.99d because this has been corrected in this version. Could you please reinstall Swisslog again? If you still have problems please send me a whatsapp message to arrange a remote Teamviewer session to check this out on line because it should work ok with latest version. Best 73 RE: QRG wrong on IC-7000 - OE1GQA - 02-10-2019 Hi Jordi Sorry for delay, I was a few days on business trip I have the version 5.99d installed, but I will reinstall the version again within the next days, if it is not working I will contact you via WhatsApp tnx 73 Guenter RE: QRG wrong on IC-7000 - OE1GQA - 02-10-2019 Hi Jordi I deinstalled Swisslog completly with the uninstall tool and installed it again but I have the same problem, that the frequency is divided and instead for example 14.202.00 it makes 1.420.20 :-( I have IC-7000, swisslog version 5.99d, computer HP, Windows version 10 73 Guenter RE: QRG wrong on IC-7000 - EA3GCV - 02-10-2019 Hi Guenter, Please contact me via whatspp to +34 656409020 in order to make a remote connection. Best 73 RE: QRG wrong on IC-7000 - EA3GCV - 02-10-2019 Hi all, Just to inform all users that this issue came because he had the "Scan TX address" option checked all the time. For some reason the Hex address changed during the session and this created this strange issue. This option is good to find out the icom Hex address for the first time if user don't know the Hex address of the Icom transceiver. Once you know the address, I recommend to set it manually in the ICOM Tx Address field and uncheck the "Scan TX address". It should work normally even with this checkbox checked but in case of problems it's better to avoid scanning the address all the time. Best 73 RE: QRG wrong on IC-7000 - OE1GQA - 02-10-2019 Hi Jordi everything is running fine now Thank you very much tnx es 73 de Guenter |