+- Swisslog's Forum (https://www.swisslogforwindows.com/forum)
+-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3)
+--- Forum: General discussion (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=4)
+--- Thread: Sopport for FT4? (/showthread.php?tid=587)
Sopport for FT4? - JW6VDA - 30-04-2019
Will you add support for the new FT4 mode by WSJT-X?
73 de Tom OH6VDA / JW6VDA
RE: Sopport for FT4? - EI4KF - 30-04-2019
(30-04-2019, 11:12 AM)JW6VDA Wrote: Will you add support for the new FT4 mode by WSJT-X?
73 de Tom OH6VDA / JW6VDA
You only need to add FT4 to QSO modes and Report modes. Swisslog will log FT4 contacts as FT4 via the UDP link from WSJTx.
Erik.
RE: Sopport for FT4? - EA3GCV - 30-04-2019
Hi,
It's exactly as Erik explains! In the next version Swisslog will add automatically the FT4 mode in those users no having the FT4 mode in the mode list. IMPORTANT: check the ID assigned to the FT4 mode. It must be higher than 11 so that the DXCC-DATA statistic count the FT4 mode. If ID is lower than 11 please edit the mode and change the ID to the next free number after the last mode (it should be 176 or around).
Best 73
RE: Sopport for FT4? - JW6VDA - 05-05-2019
The next free number was 177.
Tnx!
RE: Sopport for FT4? - EA3GCV - 05-05-2019
Perfect!