Dx spots in DX message window - Printable Version +- Swisslog's Forum (https://www.swisslogforwindows.com/forum) +-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3) +--- Forum: General discussion (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=4) +--- Thread: Dx spots in DX message window (/showthread.php?tid=33) |
Dx spots in DX message window - OK1FBE - 20-08-2013 Hello, I am unable to set correct transfer of DX spots from telnet server or from DX Telnet software into DX messages window. Some messages come through (are displayed) but irregularly with variable delay some do not come at all. I have tried various Telnet servers and DX Telnet software too (connection with TCP/IP was fully impossible w/DX Telnet). Single Windows for each Telnet server show the spots ok. Can anybody help me? Further to this facts some spots are coming through with any Telnet server being set active. Is there any filtering in Swisslog? Regards Vaclav OK1FBE RE: Dx spots in DX message window - EA3GCV - 21-08-2013 Hello Vaclav, Maybe you have set some band/mode filter in the DX Message window. Right click on the DX-Message window to set the Band/Mode selection. Probably the missing dx messages are due to this. Best 73 RE: Dx spots in DX message window - OK1FBE - 26-08-2013 Hello Jordi, thanks for replay. You were true, it was my mistake (inadvertent change in settings). Now it works ok. Best regards Vaclav OK1FBE |