New 60m band on HB9 - Printable Version +- Swisslog's Forum (https://www.swisslogforwindows.com/forum) +-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3) +--- Forum: General discussion (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=4) +--- Thread: New 60m band on HB9 (/showthread.php?tid=287)

New 60m band on HB9 - EA3GCV - 18-12-2016 Hi all, From 1st January 2017 the 60m band is allowed in HB9. You can add manually this band (and any other) in Swisslog performing this steps: Go to Edit | Add / Edit bands Press NEW Set 60m as Band name and set the Top and bottom frequencies  Press the Save button That's all! you have added the new 60m band in Swisslog! Best 73 RE: New 60m band missed in cluster window - OZ4VW - 21-12-2016 Good evening As far as I se it is on the list already But I´m not able to get the 60 meter spot in the window for Cluster spots Same with 23 cm They are ticket in tick box Any hints Br Arne RE: New 60m band on HB9 - EA3GCV - 22-12-2016 Hello Arne, If you have it on the band list is because you have add it manually. In order to see 60m spots make sure of the following: - You have set the right Top and bottom frequencies in the 60m definitions - Add a band plan in Edit / Edit band plan for the 60m band The QRG indicated in the spot must match in the QRG range defined in the band otherwise won't be listed even if ticked. Maybe you will have to add a 23m band plan as well in order to see 23m spots. Best 73