+- Swisslog's Forum (https://www.swisslogforwindows.com/forum)
+-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3)
+--- Forum: Error reports (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=6)
+--- Thread: missing FT2 (/showthread.php?tid=1346)
missing FT2 - DL1IP - 17-04-2026
Hi Jordi,
FYI, I've noticed these two things.
1. Export log to WSJT-X JTDX , Mode selection missing FT2
End 2. Entry of QSOs Membership Panel Rhein Ruhr DX Association
The problem always occurs on restart.
Otherwise, everything's great and thanks.
VY 73 DL1IP
RE: missing FT2 - EA3GCV - 18-04-2026
Hi,
OK point number one. It will be fixed. But you can add FT2 easily by editing the SWISSLV5.INI file, locate the WSJTEXport section and add FT2 in the Modelist key this way:
Modelist=FT2,FT4,FT8,ISCAT,JT4,JT65,JT9,MSK144,QRA64,T10,WSPR
But could you explain in detail what happens with RRDXA? You have not explained the issue.
73
RE: missing FT2 - DL1IP - 18-04-2026
... everytime I DE-CHECK the boxes it works fine, but they are automatically checked again after restart/re-boot.
RE: missing FT2 - DL1IP - 18-04-2026
(18-04-2026, 03:49 PM)EA3GCV Wrote: Hi,editing the SWISSLV5.INI Modelist=FT2 is fb ok..
OK point number one. It will be fixed. But you can add FT2 easily by editing the SWISSLV5.INI file, locate the WSJTEXport section and add FT2 in the Modelist key this way:
Modelist=FT2,FT4,FT8,ISCAT,JT4,JT65,JT9,MSK144,QRA64,T10,WSPR
But could you explain in detail what happens with RRDXA? You have not explained the issue.
73
Thanks vy 73 DL1IP
RE: missing FT2 - EA3GCV - 19-04-2026
Hi,
I have released a beta that fix this and adds all supoorted modes from WSJT-X/JTDX.
You have check the "Save desktop at exit" which is available in the main Options menu. Otherwise all changes are only applied to the current session only.
73
RE: missing FT2 - DL1IP - 19-04-2026
Hi Jordi,
Ok, fine.
thanks for your reply and info.
vy 73 Karl