+- Swisslog's Forum (https://www.swisslogforwindows.com/forum)
+-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3)
+--- Forum: Error reports (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=6)
+--- Thread: FTX-1 not reading mode (/showthread.php?tid=1337)
FTX-1 not reading mode - OK2KG - 05-03-2026
Hello Jordi,
first of all, many thanks for your excellent support for Swisslog.
I have finally (after 3 months) received back my FTX-1 Optima from warranty repair, and connecetd it to Swisslog, my main log allready more than 30 years.
I receive the frequency from thr TRX without problems, but, when i change mode from CW to SSB or vice versa the mode in Swisslog does not change, as usual with my other radios (FTdx101d, IC9700, FT-891, IC7000).
73! George OK2KG
RE: FTX-1 not reading mode - EA3GCV - 05-03-2026
Hi George,
It's strange because another user reported me that the FTX-1 implementation works perfectly:
https://www.swisslogforwindows.com/forum/showthread.php?tid=1315&highlight=ftx-1
I need to know the communication commands betweeb FTX-1 and Swisslog. In the Transceiver control options, press STOP then START, go to the COM monitor, then press the "Save to file" button and send me the file "TRX trace.txt" to support@swisslogforwindows.com
73