+- Swisslog's Forum (https://www.swisslogforwindows.com/forum)
+-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3)
+--- Forum: Error reports (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=6)
+--- Thread: access violation error (/showthread.php?tid=1332)
access violation error - on4bam - 14-02-2026
Hi,
After using a TS-480SAT for a very long time the TRX died on me a few weeks ago.
I got an IC-7300MK2 since yesterday and it seems that Swisslog doesn't like this trx much
On starting Swisslog (5.115) it shows 2 errors.
After clicking OK it seems SL works as expected.
At first I thought it had to do with WSJT-X starting up with SL but unselecting autostart makes no difference.
Swisslog uses omnirig to connect to the IC7300.
Any ideas?
Thanks.
RE: access violation error - EA3GCV - 15-02-2026
Hi Maurice,
If you use OmniRig with Swisslog you need to run Swisslog as administrator to get rid of these error messages.Mouse right click on the Swisslog icon - Properties - Compatibility - Check "Run as administrator". Problem solved!
Remember that this setting is ERASED after a new Swisslog version! Remember to set it back after upgrading Swisslog.
73