+- Swisslog's Forum (https://www.swisslogforwindows.com/forum)
+-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3)
+--- Forum: Error reports (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=6)
+--- Thread: QSO INFOs via UDP (/showthread.php?tid=1331)
QSO INFOs via UDP - SV1FTY - 09-02-2026
Hello to all,
I send contact infos via UDP to swisslog (from my selfmade logbook in python) all are ok but the UTC qso-time , although I send it in UTC, once SWL receives the contact infos turns the time in local (of course in qso option "Store UTC in log" is ticked - the realtime qso entry no matter - ticked or not)
Any suggestion please ?
P.S.
The forwarding contact infos format are the same as the incoming ones ( in XML format ?)
73 de SV1FTY Sotiris
RE: QSO INFOs via UDP - EA3GCV - 09-02-2026
Hello,
Send me a XML record to test. Swisslog uses the N1MM XML format and it's working perfectly receiving data from all software sending this format (such as N1MM itself or DM780 from HRD). But I need to see a full record. Have you tested to send QSOs to N1MM to see if the time is also converted? Once you send me a single QSO record I can test here.
73
RE: QSO INFOs via UDP - SV1FTY - 09-02-2026
Hello Jordi,
Thank you for prompt reply
No problem at all now, "forgot" to conver local to utc time !!!! (such is life hi,hi )
for the second part of my question:
The forwarding contact infos format are the same as the incoming ones ( in XML format ?)
Thank you again
SV1TY - Sotiris
best regards
RE: QSO INFOs via UDP - EA3GCV - 10-02-2026
Hello Sotiris,
Glad all is working well, it was very weird this issue is Date was sent properly in your software.
73