Change QSL Action - Printable Version +- Swisslog's Forum (https://www.swisslogforwindows.com/forum) +-- Forum: Swisslog version 5.x (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=3) +--- Forum: General discussion (https://www.swisslogforwindows.com/forum/forumdisplay.php?fid=4) +--- Thread: Change QSL Action (/showthread.php?tid=1034) |
Change QSL Action - HB9TZU - 20-09-2022 Good evening Swisslog users Once again I have a question and hope to get an answer here. As an example, I would like to display all QSOs since 1 January 2020 in FT8 mode (I can do this using the column selection) and then mark them all. Then I would like to change the QSL action, for example, to eQSL for all marked QSOs in one go. In HRD Logbook, I could do this with the Bulk Editor. Is this also possible in Swisslog and how? Best thanks Christof / HB9TZU RE: Change QSL Action - EA3GCV - 20-09-2022 Hi Christof, Of course you can do it and very easily!! Please read the "Multiple QSO Update" chapter in the Swisslog help or clicking here: https://www.swisslogforwindows.com/english/Help/Multiple%20QSO%20Update.htm The key is mouse right click on any content of the field you want to change then select Edit > Change selected QSO (if manually selecletd) or Change all QSOs (if filtered). Please read it carefully. Best 73 RE: Change QSL Action - HB9TZU - 21-09-2022 Good day Jordi Thank you very much for your quick answer to my question. I read through the Multiple QSO Update chapter this morning in the office. I will do it at home in the evening according to the chapter. This will work in any case. 73 Christof / HB9TZU |